BULLPUP FORUM

Rimfire Bullpups => Ruger 1022 Bullpups => Topic started by: Zolkalf on February 24, 2021, 10:24:23 AM



Title: FTE?
Post by: Zolkalf on February 24, 2021, 10:24:23 AM
Morning,
I took my little PS90 10/22 to te range not to long ago and the casings would not eject. If I pulled the charging handle they would eject but she wouldn't do it just squeezing the trigger and the next round would not load. The last time I shot it before this she worked flawlessly so I am a little puzzled what happened just by sitting in the safe.

I thought I'd ask if there are any check things I can look at before I break the whole kit down with all them screws.


Title: Re: FTE?
Post by: bpguy on February 24, 2021, 03:25:48 PM
When was the last time you cleaned it?  Removed the BCG and cleaned that too?  22 rifles run really dirty and should be stripped and cleaned after every use.


Title: Re: FTE?
Post by: Zolkalf on February 27, 2021, 11:25:22 AM
It's been a minute but if I have to unscrew every screw, totally take it apart and then put it back together I'm not gonna be liking that to well. I'll see what I can do. Thanks for the reply.


Title: Re: FTE?
Post by: Zolkalf on March 30, 2021, 04:46:27 PM
The problem was ammo related and she works like a Champ. And I did clean it good so that never hurts, Thanks for the input. And......I had a guy walk up and say he liked my P90. His head spun when I told him it was a Ruger 22.  :cheerleader


Title: Re: FTE?
Post by: Plinker on April 01, 2021, 12:39:46 PM
Excellent!  Thanks for the update!