Welcome, Guest. Please login or register.
March 04, 2021, 11:05:02 AM
Home Home Help Calendar Login Register
News:

+  BULLPUP FORUM
|-+  Bullpup Rifles (Auto & Semi-Auto Centerfire)
| |-+  IWI TAVOR
| | |-+  Mounting a suppressor on an x95 .300 BLK?
Pages: [1] Print
Author Topic: Mounting a suppressor on an x95 .300 BLK?  (Read 366 times)
Ouborat7
Member
**
Offline Offline

Posts: 121


« on: February 05, 2021, 10:05:29 PM »

I just took my x95 and Larue tranquilo brake/suppressor to a gun smith to get the brake installed so I can use a suppressor on it...

The gunsmith told me there is no shoulder on the gun and that the only way he can mount the brake on there is against the jam nut....he said he does not recommend that because he said is not ideal....he said it could loosen off. He said it could build up and when I take the suppressor off it will loosen out. He said he also can not guarantee that I will not get baffle strikes if I mount it this way.

So it could loosen off, could get baffle strikes, and I think there where some other reasons like getting it timed right....basically upon his recommendation...I didnít not put the brake on there...

I know Iíve seen a lot of people online using suppressors on their x95s...what gives? Can someone give me some good advice on this topic? I really want to suppress it but donít want baffle strikes or other issues?
What should I do?
« Last Edit: February 05, 2021, 10:07:33 PM by Ouborat7 » Logged
TCPTavor
Member
**
Offline Offline

Posts: 5


« Reply #1 on: February 06, 2021, 08:17:14 AM »

I went with a Kaw Valley tri lug mount but have not put it on yet, I will use the jam nut as it mounts in stock form and won't come off. My thought is... go for a flash hinder (if you can find one) for when the can is off and not a break, it's only a .300 after all.
Good luck.  Smiley
« Last Edit: February 06, 2021, 08:18:56 AM by TCPTavor » Logged
Ouborat7
Member
**
Offline Offline

Posts: 121


« Reply #2 on: February 06, 2021, 01:14:09 PM »

As far as I know Larue does not make a FH that goes with it but I should check into it.
Logged
Ouborat7
Member
**
Offline Offline

Posts: 121


« Reply #3 on: February 06, 2021, 11:26:31 PM »

Anyone else have experience with this?
Logged
rolfl
^
Member
**
Offline Offline

Posts: 26



« Reply #4 on: February 07, 2021, 07:38:50 AM »


IWI said they were using the jam nut but followed with disclaimer to do what you suppressor manufacture recommends, and  suppressor manufacturer said to do what IWI recommends - Catch 22 🤔

Iím using the jam nut, just tightened it very well.
No issues with loosening after taking it through IWI operator II class - 700 rounds.
Checked suppressor alignment using a geissele suppressor alignment rod.


Sent from my iPhone using Tapatalk Pro
Logged
TCPTavor
Member
**
Offline Offline

Posts: 5


« Reply #5 on: February 07, 2021, 02:18:41 PM »

Omega 9K on my X95 .300 with no jam nut.


* IMG_0362.jpg (879.23 KB, 1679x2110 - viewed 32 times.)
Logged
Zolkalf
Sr. Member
***
Offline Offline

Posts: 427



« Reply #6 on: February 08, 2021, 04:49:54 PM »

My OSS break is pinned and welded on a cut barrel. That's how I done mine.
Logged

Track the liars down and then remove their crowns!
Zolkalf on PubG
AverageJo
Member
**
Offline Offline

Posts: 47


« Reply #7 on: February 08, 2021, 04:59:40 PM »

I use the suppressor on both x95 and SAR without the jam nut and it is ok. You just have to get the muzzle device that buts up again the tiny shoulder or end of muzzle. The suppressor I use is AAC m4-2000 and my muzzle device does not need to be timed.

Ps. Do not use jam nut
Logged
Eltee49
New Posting Member
*
Offline Offline

Posts: 2


« Reply #8 on: February 22, 2021, 03:41:06 AM »

I just received my Dead Air Wolfman suppressor. It has an interchangeable mounting base which includes a 3 lug mount. The make a 1/2 x 28 thread combination 3 lug flash suppressor which I am waiting for. With the 3 lug flash suppressor screwed on to my TAVOR barrel I will be able to easily mount / dismount the suppressor.
Logged
Pages: [1] Print 
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
SimplePortal 2.3.5 © 2008-2012, SimplePortal
Valid XHTML 1.0! Valid CSS!