Welcome, Guest. Please login or register.
December 10, 2018, 02:09:56 PM
Home Home Help Calendar Login Register
News:

Please support BullpupForum.com sponsors!!
. . . Midwest Industries . . . BullpupArmory.com . . . Shooting Sight . . . BullpupUnlimited.com . . . Homeland Guns . . . . . . . . . . . . AB Arms . . . GallowayPrecision.com . . . K & M Arms . . . . . . Geissele Automatics
+  BULLPUP FORUM
|-+  Bullpup Rifles (Auto & Semi-Auto Centerfire)
| |-+  IWI TAVOR
| | |-+  IWI Tavor SAR & X-95
| | | |-+  Problem to disassemble the fire pin from bolt carrier
Pages: [1] Print
Author Topic: Problem to disassemble the fire pin from bolt carrier  (Read 260 times)
xiaohan
Member
**
Offline Offline

Posts: 9


« on: November 29, 2018, 10:09:57 AM »

I am having some trouble to disassemble the fire pin part from the bolt carrier part of the X95 rifle.

For Tavor SAR it looks like really straight forward, but for X95 it seems different.

I found this youtube video: https://www.youtube.com/watch?v=cYjjdPU6oYU, it looks you need to knock from the hole somewhere above the firing pin first to push the guide rod further back, then you can take the bolt from the side out.

This video shows knock from the back, https://www.youtube.com/watch?v=QscOqDDCPKo, not sure which way is the correct one for X95.

Any suggestions would be really appreciated. Thank you.

FYI. I have the Tavor tool from IWI website.
Logged
cciman
Member
**
Offline Offline

Posts: 236



« Reply #1 on: November 29, 2018, 05:05:26 PM »



Do you have a manual.  It tells you step by step how to do it.

They have it on the IWI website.
Logged
xiaohan
Member
**
Offline Offline

Posts: 9


« Reply #2 on: November 29, 2018, 06:51:59 PM »



Do you have a manual.  It tells you step by step how to do it.

They have it on the IWI website.
I tried, the lock pin doesn't move, I don't want to force it, so googled it, found two different options. Not sure if it is right way to do so.
Logged
cciman
Member
**
Offline Offline

Posts: 236



« Reply #3 on: November 29, 2018, 07:24:07 PM »

You push on the bolt, against the spring, the lock pin will fall out with minimal force.

Reread the instructions.  Carefully follow the  manual directions.
Logged
xiaohan
Member
**
Offline Offline

Posts: 9


« Reply #4 on: November 30, 2018, 12:44:32 AM »

You push on the bolt, against the spring, the lock pin will fall out with minimal force.

Reread the instructions.  Carefully follow the  manual directions.
Followed exactly what manual said and illustrated. Still the same.

But when tried to use a hammer to pinch the bolt carrier rod towards back, it actually works. Just like the first video demonstrated.  https://www.youtube.com/watch?v=cYjjdPU6oYU
Not sure if it is related to a Canadian market for, hopefully not.
Logged
Pages: [1] Print 
Jump to:  



Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
SimplePortal 2.3.5 © 2008-2012, SimplePortal
Valid XHTML 1.0! Valid CSS!