BULLPUP FORUM

Getting Started... => BullpupForum.com Site Rules => Topic started by: Fograt33 on December 22, 2015, 05:49:35 PM



Title: MSAR STG 556 / 223
Post by: Fograt33 on December 22, 2015, 05:49:35 PM
Anybody know about this weapon? i purchased it about 2 years ago when the rumor of a large clip ban was circulating. There was very little available at the time and I found this one at local shop. They were selling it for a private party.

It came with 3 - 42 round clips and it appeared to be "new". When my son in law and I finally took it out of the closet, we couldn't get it to fire more than one round without jamming. Took it back to the shop and they didn't have a clue. Tried another shop and got similar results - their advice was use plenty of lube to the point of splashing. That's counter to everything I ever heard about proper lubrication.

I finally took it to an old timer local gunsmith and he says it needs an extractor. Trouble is where to get one or have one made?


Title: Re: MSAR STG 556 / 223
Post by: BullpupT on February 03, 2016, 02:53:03 PM
You will find all the info you need right here. They are clones of the AUG but some parts are not interchangeable. The broken extractor is a known issue. The rifle was promising but the standard AUG is a much more reliable and better made system.

AUG's are readily available now so the MSAR's aren't the first choice for that design. I believe the company is out of business.

Search through these posts. You will find exactly the info you are looking for. Broken extractors are normal with that manufacturer.

http://bullpupforum.com/index.php?board=21.0


Title: Re: MSAR STG 556 / 223
Post by: maleante on February 03, 2016, 04:16:32 PM
Ask your question here:  http://bullpupforum.com/index.php?board=4.0 (http://bullpupforum.com/index.php?board=4.0)

You'll also probably need to call Ratworx in IL. I think they are your only source for MSAR parts now.