BULLPUP FORUM

Bullpup Rifles (Auto & Semi-Auto Centerfire) => IWI Tavor SAR & X-95 => Topic started by: l2a3 on March 13, 2019, 09:38:51 PM



Title: Meprolight Day-Night 30mm Military Reflex Sight, 4.3MOA Dot on the X-95
Post by: l2a3 on March 13, 2019, 09:38:51 PM
Has anyone figured how to attach the button switch that was made for the SAR to fit the X-95 handguard so it can be used by both hands. (Not the top of the rail "C clamp" grip)
The Velcro strips are useable but I am sure there is a better solution, but I am at a loss for a solution, except to use the straps attached to the switch around the whole hand guard or Velcro the button to the hand guard where both hands can reach it.
Any ideas??
Thanks for any and all suggestions.


Title: Re: Meprolight Day-Night 30mm Military Reflex Sight, 4.3MOA Dot on the X-95
Post by: DubageL on March 14, 2019, 05:03:25 AM
If the optic you are referring to is the MeproMOR, they do make 2 length pigtail switches and are user changeable. You’re unfortunately going to have to use a front vertical grip. The IDF mounts the switch 2 ways when used with the round handguards, which unfortunately is not an option for us as the round one’s are not around. Either externally on a vertical foregrip or internally as the later versions of the round handguard has a provision in it for a switch. The US modeled x95 pic-railed does not have an internal provision. The new version of the IDF x95 has a 15” barrel and modified “US type” handguard and covers which are similar to the US sbr model. But has some slight differences. Two of them being having a hole in it to thread the switch internally and mount the switch, and the covers having a pop off button where the switch sits. You can see in the photos on the web, some are still running it externally and with a foregrip. I run an ITL/MARS sight and run the switch over the top rail to the right side. Use a rubber ladder rail cover to prevent cutting/damaging the wire. Then I have an elastic band around the whole handguard with slider buckle to hold the switch where I want it.


Title: Re: Meprolight Day-Night 30mm Military Reflex Sight, 4.3MOA Dot on the X-95
Post by: l2a3 on March 17, 2019, 06:30:49 PM
Here is what I ended up after trying different positions, without adding a lot more parts and weight.
Thank you Dubagel for the idea of using a rubber ladder rail to protect the wiring. (It also allows attaching the zip ties to hold the wiring)


Title: Re: Meprolight Day-Night 30mm Military Reflex Sight, 4.3MOA Dot on the X-95
Post by: l2a3 on March 17, 2019, 06:32:31 PM
Please remove this excess post.