BULLPUP FORUM

Bullpup Rifles (Auto & Semi-Auto Centerfire) => IWI Tavor SAR & X-95 => Topic started by: MaverickNH on July 10, 2018, 12:48:52 PM



Title: X95 3in Hi at 50ft with Omega 300 Suppressor
Post by: MaverickNH on July 10, 2018, 12:48:52 PM
My X95 in 300 AAC shoots 2-1/2 to 3 inches high with a Silencerco Omega 300 suppressor attached via the quick- release mount over the muzzle brake using S&B 200g Subsonic. Does that makes sense? It cycles fine on subsonic gas setting with or without the can on and leaks a bit of gas at the back of the rail and from the ejection port with the can on.


Title: Re: X95 3in Hi at 50ft with Omega 300 Suppressor
Post by: SteveD on July 10, 2018, 08:59:44 PM
I would say if the shift is consistent, than yes. If it's shooting all over the place something is loose or wrong. I remember I changed out my muzzle device once and it shifted my poi 3" right at 50 yards. I imagine the can is shifting the poi but if you just placed a new muzzle device on and shot with the can that could explain it.